Merge pull request #21 from gaudi369/docs

Module 6

Author: gaudi369

arch134b_workshops/_static/spec2/spec2_1.png

@@ -1 +1,57 @@
+# Specifying Heating and Cooling Setpoint Schedule and HVAC Type
 
+Disconnect setpoint definition introduced in Module 4
+```{image} ../_static/spec2/spec2_1.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Route program definition through new "Program Type" component
+```{image} ../_static/spec2/spec2_2.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Above, in a new block, create the "Apply Setpoint" and two "Weekly Schedule" components as shown.
+```{image} ../_static/spec2/spec2_3.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Add and adust setpoint values for weekday and weekend schedules as shown. Do not connect befor adjusting otherwise it will simulate after each update and take a long time. 
+```{image} ../_static/spec2/spec2_4.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Add type limits for each weekly shedule as shown to avoid errors.
+```{image} ../_static/spec2/spec2_5.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Connect your "Setpoint" block to your "Program Type" as shown. This should cause a new simulation to run. Try to guess if your new setpoints will lower or raise EUI. 
+```{image} ../_static/spec2/spec2_6.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+You can define other HVAC System Types using components found in the HVAC tab in HB-Energy. 
+```{image} ../_static/spec2/spec2_7.png
+:width: 100%
+:align: center
+```
+<br/><br/>
+
+Here is how to link the HVAC Type component to the rest of your simulation. Try different types and see how your EUI changes. 
+```{image} ../_static/spec2/spec2_8.png
+:width: 100%
+:align: center
+```
+<br/><br/>