Motion guard and MQTT

[kasitoru]

Не срабатывает отправка MQTT сообщения при обнаружении движения (Motion guard).

Как выяснилось, все дело в том, что в файле motiondetection.sh отсутствует вызов соответствующего скрипта (как в master, так и в dev ветке).

Это ошибка, или необходима какая то дополнительная настройка для данной функции?

[flyrouter]

Кнопки ручной отправки MQTT на странице Preview так-же нет.
Я думаю Павел освободится и на днях сделает.
Просто как всегда, не было до этого желающих тестировать..

[darkfuncat]

Hi all,
Any update for this issue please ?
I can test for you.
Thx

[themactep]

Please update from dev branch and give it a try.

[darkfuncat]

Hi,
I have updated both firmware and web to last version, but it is very unstable now.
No more trigger in FTP, and MQTT still does not work.

[themactep]

What was the previous version of your firmware?

[themactep]

There is a log file in /tmp/webui.log, check it for any clues.

[darkfuncat]

Hello again,
After some tests, I have well received some info in MQTT channel, thanks.
Due to update of both formware and web ui, the system is unstable now and have to reboot very frequently,, but this feature seems correct.
Many thanks.
Other related question : do you know what is posted in the MQTT channel "MQTT topic" ? I received only some alarm trigger, but not all. And for strange reason, I still continue to receive MQTT message from other previous firmware like :
{"fw_version":"1.3.1","ip_address":"192.168.31.60","total_ram":41467904,"free_ram":1277952,"total_sdmem":20733952,"free_sdmem":20733952,"total_configs":393216,"free_configs":176128,"volume_level":70,"media_status":false,"image_url":"http://192.168.31.60/cgi/get_image.cgi"}

[kasitoru]

I still continue to receive MQTT message from other previous firmware like

Check this message for the retain flag.

[themactep]

"image_url":"http://192.168.31.60/cgi/get_image.cgi"

Are you sure this message is from OpenIPC camera? We don't have such an URL.

[darkfuncat]

HI,
I dont know well MQTT, but I think this is a "permanent" message that is stored at some place, but i dont know where. I restarted the MQTT broker many times, camera as well ... I dont understand where this message come from.

[kasitoru]

@darkfuncat this problem is off topic. Ask here https://github.com/kasitoru/mjsxj02hl_firmware/issues