Mouse do not switch

[esterjob]

Hello there,
listen.. i have a issue with mouse, bacause do not switch, led are active and blink, but i can see the pointer only in my computer desktop and not on notebook, confguration is correct, cable are correcet, you can help please? Some suggestions? Thank you so much..

[hrvach]

If both leds blink when plugging in kbd or mouse, then I'd try to use different cables between the box and the PC. Maybe one of those is just a power cable?

Try swapping them first, see if it works on the notebook now? If you plug mouse to the keyboard port, same thing?

[esterjob]

Hello, thank you, led do not blink, the light is solid green, I think the power cables are correct. It's strange that the keyboard sometimes works and sometimes doesn't, with the same connection it either works or doesn't work. I've tried at least 20 cables but nothing, are there any special features for the usb/mini usb power cables?

[hrvach]

Check https://github.com/hrvach/deskhop/wiki/Troubleshooting first, when you plug in the keyboard or the mouse, do you see a quick blink between the two leds like in the troubleshooting wiki page?
Try programming the latest firmware to the picos (you did write the firmware after getting the board?) - check the readme or the pdf manual on how to do that. Try another keyboard / mouse if available.

If nothing of this helps, let me know and we'll brainstorm :)

[esterjob]

Hello, thank you so much, i hace read your guidelines, but on this point:
Connect both Picos to their outputs, then plug in just the keyboard to board A. LEDs should flash quickly back and forth (once).

board_ok2

This means board A talks to your USB device correctly and can send messages to the other board. Repeat with USB port on board B.

First point do not blink nothing.
Second point also.
I have the blink only for mouse when i muove that.

I think the devices do not work fine... what you think about?

[lfmerk]

Hi there, Did you finally solved the problem. I have the same issue!!!