chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to v0.74.0 (release/v1) #262

renovate · 2024-04-02T17:19:08Z

This PR contains the following updates:

Package	Type	Update	Change
cloudposse/ecs-alb-service-task/aws (source)	module	minor	`0.64.1` -> `0.74.0`

Release Notes

cloudposse/terraform-aws-ecs-alb-service-task (cloudposse/ecs-alb-service-task/aws)

`v0.74.0`

Compare Source

🚀 Enhancements

feat: Add task_definition_arn_without_revision output @adamantike (#216)

what

Add task_definition_arn_without_revision output, using the arn_without_revision attribute from aws_ecs_task_definition resource.
Update minimum AWS provider version to v4.59.0.

why

Useful for situations where the latest task definition is always desired.
Avoiding manual string manipulation to strip the revision from the ARN.

references

Added to AWS provider in version v4.59.0: https://github.com/hashicorp/terraform-provider-aws/issues/27119

`v0.73.0`

Compare Source

Make `elb_name` optional @lagerfeuer (#215)

what

Make elb_name in ecs_load_balancer optional, as described in the linked Terraform docs for ECS Service.

why

Currently, when creating a service without elb_name, Terraform will fail because it expects the variable to be set. The workaround is to set it to null.

references

https://registry.terraform.io/providers/hashicorp/aws/latest/docs/resources/ecs_service#load_balancer

`v0.72.0`

Compare Source

🚀 Enhancements

feat: support ECS service connect @gberenice (#212)

what

This adds support for ECS Service connect, which is already supported by the provider, see service_connect_configuration block.

why

Extend the module's functionality.

references

There is a PR that partially covers this feature, but unfortunately, it's not active for a while, and there are requested changes to be done: https://github.com/cloudposse/terraform-aws-ecs-alb-service-task/pull/208

`v0.71.0`

Compare Source

feat: add pid and ipc mode to task def @dudymas (#206)

what

add ipc_mode
add pid_mode

why

support host level access for monitoring processes

`v0.70.0`

Compare Source

fix external task definition must exist before first run @mightyguava (#204)

what

Change external task definition to a list(string) so that it can be flagged on without needing the task definition to already exist.

why

Fix this issue when using an external task definition

│   49:   count                    = local.enabled && var.task_definition == null ? 1 : 0
│
│ The "count" value depends on resource attributes that cannot be determined
│ until apply, so Terraform cannot predict how many instances will be
│ created. To work around this, use the -target argument to first apply only
│ the resources that the count depends on.

references

Similar to how this was solved for the task role arn https://github.com/cloudposse/terraform-aws-ecs-alb-service-task/blob/main/variables.tf#L216-L226. The workaround for now is to use -target like mentioned in #123.

Sync github @max-lobur (#199)

Sync github from the template

`v0.69.0`

Compare Source

No changes

`v0.68.0`

Compare Source

Accept map or list for policy arns @Nuru (#198)

what

Accept both map (task_policy_arns_map, task_exec_policy_arns_map) and list (task_policy_arns, task_exec_policy_arns) inputs for policy ARNs. Supersedes and closes #196.
Add depends_on for ecs_service resource to aws_iam_role_policy.ecs_service.
- Closes #182
- Closes #187

why

History

Issue #167 is typical behavior when supplying a list of inputs to convert into resources. The solution to it is to provide a map of resources, so that changes are limited to what is necessary according to the change in inputs. Adding to or removing from the list, or changing the order of the list, no longer affects the list items that did not change, because each item is now referenced by the key in the map rather than its index in the list.
PR #178 tried to fix #167 by using the input values as keys. However, this created issue #191, because the values (IAM Policy ARNs) are generated by the terraform apply and are therefore not known at plan time, which is a requirement.
PR #194 fixed #198, but re-introduced #167, because it simply replaced the implicit "list index as key" with an explicit one in the case of list inputs.
PR #195 used the values as keys, but this just recreated #191, so it was abandoned
PR #196 used a little-used provider that tries to let us have it both ways: it gives us #167 if the values are unknown at plan time but works well if the values are known at plan time. Unfortunately, this can render a plan non-deterministic. Even more importantly, it does not give a user whose values are unknown at plan time a way to avoid #167.

This Solution

With the solution provided by this PR, any user can avoid #167 by providing a map whose keys are known at plan time, regardless of whether the values are known at plan time. Policy ARNs could be labeled by name, purpose, region, or whatever the user wants to avoid #167. Or, if the user doesn't care about #167, perhaps because they are only supplying a single Policy ARN, then they can just supply it in a list.

`v0.67.1`

Compare Source

🚀 Enhancements

Use map for task & task exec policy arns variables @joe-niland (#194)

what

Replaced variables task_policy_arns and task_exec_policy_arns with task_policy_arns_map and task_exec_policy_arns_map respectively
Existing variables were moved to variables-deprecated.tf and values will be internally converted to a map if variables are defined

why

The for_each change implemented in cloudposse/terraform-aws-ecs-alb-service-task@14008fc has the potential to cause the Terraform '"for_each" value depends on resource attributes that cannot be determined until apply' error.
Modifying this input to use a map can circumvent this error

references

closes #191

`v0.67.0`

Compare Source

Add option to trigger a redeployment on apply @joe-niland (#193)

what

Adds a variable to enable/disable triggering a new ECS service deployment on apply.

why

In aws provider v4.40.0 an option was added to allow triggering a new ECS service deployment on apply.
This is useful so the service can be updated to the latest service/task configuration without needing to take additional steps are applying the Terraform config.

references

None

`v0.66.4`

Compare Source

🚀 Enhancements

Task Role uses for-each instead of count @Benbentwo (#178)

what

task role uses for each

why

fixes: #167

Note:

The outputs had to be changed to output a map as a single string, hence why they look complex, it's to keep backwards compatibility

🐛 Bug Fixes

Task Role uses for-each instead of count @Benbentwo (#178)

what

task role uses for each

why

fixes: #167

Note:

The outputs had to be changed to output a map as a single string, hence why they look complex, it's to keep backwards compatibility

`v0.66.3`

Compare Source

🚀 Enhancements

make `host_path` optional for fargate @Benbentwo (#176)

what

Sets host_path as optional in bind_mount_volumes for fargate which it cannot be specified

why

Fargate Volumes

references

Closes #174

`v0.66.2`

Compare Source

Adding support for bind mount volume types @bfox1793 (#173)

what

Adding support for a basic bind_mount volume type for tasks

why

This is a supported feature of ECS. This update adds that support into the terraform module

references

closes #172

🤖 Automatic Updates

Update README.md and docs @cloudpossebot (#171)

what

This is an auto-generated PR that updates the README.md and docs

why

To have most recent changes of README.md and doc from origin templates

`v0.66.1`

Compare Source

🚀 Enhancements

Set bool inputs to type bool @nitrocode (#170)

what

set bool type on applicable inputs
bumped test version to latest in example module

why

ecs_service_enabled used string instead of bool type

references

Previous PR https://github.com/cloudposse/terraform-aws-ecs-alb-service-task/pull/169
Previous PR https://github.com/cloudposse/terraform-aws-ecs-alb-service-task/pull/162

command

terraform plan -var "ecs_service_enabled=false" -var-file=fixtures.us-east-2.tfvars

### aws_ecs_cluster.default will be created
  + resource "aws_ecs_cluster" "default" {
      + arn                = (known after apply)
      + capacity_providers = (known after apply)
      + id                 = (known after apply)
      + name               = "eg-test-ecs-alb-service-task"
      + tags               = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + tags_all           = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }

      + default_capacity_provider_strategy {
          + base              = (known after apply)
          + capacity_provider = (known after apply)
          + weight            = (known after apply)
        }

      + setting {
          + name  = (known after apply)
          + value = (known after apply)
        }
    }

### module.ecs_alb_service_task.aws_ecs_task_definition.default[0] will be created
  + resource "aws_ecs_task_definition" "default" {
      + arn                      = (known after apply)
      + container_definitions    = jsonencode(
            [
              + {
                  + cpu                    = 256
                  + environment            = [
                      + {
                          + name  = "false_boolean_var"
                          + value = "false"
                        },
                      + {
                          + name  = "integer_var"
                          + value = "42"
                        },
                      + {
                          + name  = "string_var"
                          + value = "I am a string"
                        },
                      + {
                          + name  = "true_boolean_var"
                          + value = "true"
                        },
                    ]
                  + essential              = true
                  + image                  = "cloudposse/geodesic"
                  + memory                 = 256
                  + memoryReservation      = 128
                  + mountPoints            = []
                  + name                   = "geodesic"
                  + portMappings           = [
                      + {
                          + containerPort = 80
                          + hostPort      = 80
                          + protocol      = "tcp"
                        },
                      + {
                          + containerPort = 443
                          + hostPort      = 443
                          + protocol      = "udp"
                        },
                    ]
                  + readonlyRootFilesystem = false
                  + volumesFrom            = []
                },
            ]
        )
      + cpu                      = "256"
      + execution_role_arn       = (known after apply)
      + family                   = "eg-test-ecs-alb-service-task"
      + id                       = (known after apply)
      + memory                   = "512"
      + network_mode             = "awsvpc"
      + requires_compatibilities = [
          + "FARGATE",
        ]
      + revision                 = (known after apply)
      + skip_destroy             = false
      + tags                     = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + tags_all                 = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + task_role_arn            = (known after apply)
    }

### module.ecs_alb_service_task.aws_iam_role.ecs_exec[0] will be created
  + resource "aws_iam_role" "ecs_exec" {
      + arn                   = (known after apply)
      + assume_role_policy    = jsonencode(
            {
              + Statement = [
                  + {
                      + Action    = "sts:AssumeRole"
                      + Effect    = "Allow"
                      + Principal = {
                          + Service = "ecs-tasks.amazonaws.com"
                        }
                      + Sid       = ""
                    },
                ]
              + Version   = "2012-10-17"
            }
        )
      + create_date           = (known after apply)
      + force_detach_policies = false
      + id                    = (known after apply)
      + managed_policy_arns   = (known after apply)
      + max_session_duration  = 3600
      + name                  = "eg-test-ecs-alb-service-task-exec"
      + name_prefix           = (known after apply)
      + path                  = "/"
      + tags                  = {
          + "Attributes" = "exec"
          + "Name"       = "eg-test-ecs-alb-service-task-exec"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + tags_all              = {
          + "Attributes" = "exec"
          + "Name"       = "eg-test-ecs-alb-service-task-exec"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + unique_id             = (known after apply)

      + inline_policy {
          + name   = (known after apply)
          + policy = (known after apply)
        }
    }

### module.ecs_alb_service_task.aws_iam_role.ecs_task[0] will be created
  + resource "aws_iam_role" "ecs_task" {
      + arn                   = (known after apply)
      + assume_role_policy    = jsonencode(
            {
              + Statement = [
                  + {
                      + Action    = "sts:AssumeRole"
                      + Effect    = "Allow"
                      + Principal = {
                          + Service = "ecs-tasks.amazonaws.com"
                        }
                      + Sid       = ""
                    },
                ]
              + Version   = "2012-10-17"
            }
        )
      + create_date           = (known after apply)
      + force_detach_policies = false
      + id                    = (known after apply)
      + managed_policy_arns   = (known after apply)
      + max_session_duration  = 3600
      + name                  = "eg-test-ecs-alb-service-task-task"
      + name_prefix           = (known after apply)
      + path                  = "/"
      + tags                  = {
          + "Attributes" = "task"
          + "Name"       = "eg-test-ecs-alb-service-task-task"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + tags_all              = {
          + "Attributes" = "task"
          + "Name"       = "eg-test-ecs-alb-service-task-task"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + unique_id             = (known after apply)

      + inline_policy {
          + name   = (known after apply)
          + policy = (known after apply)
        }
    }

### module.ecs_alb_service_task.aws_iam_role_policy.ecs_exec[0] will be created
  + resource "aws_iam_role_policy" "ecs_exec" {
      + id     = (known after apply)
      + name   = "eg-test-ecs-alb-service-task-exec"
      + policy = jsonencode(
            {
              + Statement = [
                  + {
                      + Action   = [
                          + "ssm:GetParameters",
                          + "logs:PutLogEvents",
                          + "logs:CreateLogStream",
                          + "logs:CreateLogGroup",
                          + "ecr:GetDownloadUrlForLayer",
                          + "ecr:GetAuthorizationToken",
                          + "ecr:BatchGetImage",
                          + "ecr:BatchCheckLayerAvailability",
                        ]
                      + Effect   = "Allow"
                      + Resource = "*"
                      + Sid      = ""
                    },
                ]
              + Version   = "2012-10-17"
            }
        )
      + role   = (known after apply)
    }

### module.ecs_alb_service_task.aws_security_group.ecs_service[0] will be created
  + resource "aws_security_group" "ecs_service" {
      + arn                    = (known after apply)
      + description            = "Allow ALL egress from ECS service"
      + egress                 = (known after apply)
      + id                     = (known after apply)
      + ingress                = (known after apply)
      + name                   = "eg-test-ecs-alb-service-task-service"
      + name_prefix            = (known after apply)
      + owner_id               = (known after apply)
      + revoke_rules_on_delete = false
      + tags                   = {
          + "Attributes" = "service"
          + "Name"       = "eg-test-ecs-alb-service-task-service"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + tags_all               = {
          + "Attributes" = "service"
          + "Name"       = "eg-test-ecs-alb-service-task-service"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + vpc_id                 = (known after apply)
    }

### module.ecs_alb_service_task.aws_security_group_rule.allow_all_egress[0] will be created
  + resource "aws_security_group_rule" "allow_all_egress" {
      + cidr_blocks              = [
          + "0.0.0.0/0",
        ]
      + description              = "Allow all outbound traffic to any IPv4 address"
      + from_port                = 0
      + id                       = (known after apply)
      + protocol                 = "-1"
      + security_group_id        = (known after apply)
      + self                     = false
      + source_security_group_id = (known after apply)
      + to_port                  = 0
      + type                     = "egress"
    }

### module.subnets.data.aws_vpc.default[0] will be read during apply
### (config refers to values not yet known)
 <= data "aws_vpc" "default"  {
      + arn                     = (known after apply)
      + cidr_block              = (known after apply)
      + cidr_block_associations = (known after apply)
      + default                 = (known after apply)
      + dhcp_options_id         = (known after apply)
      + enable_dns_hostnames    = (known after apply)
      + enable_dns_support      = (known after apply)
      + id                      = (known after apply)
      + instance_tenancy        = (known after apply)
      + ipv6_association_id     = (known after apply)
      + ipv6_cidr_block         = (known after apply)
      + main_route_table_id     = (known after apply)
      + owner_id                = (known after apply)
      + state                   = (known after apply)
      + tags                    = (known after apply)

      + timeouts {
          + read = (known after apply)
        }
    }

### module.subnets.aws_eip.default[0] will be created
  + resource "aws_eip" "default" {
      + allocation_id        = (known after apply)
      + association_id       = (known after apply)
      + carrier_ip           = (known after apply)
      + customer_owned_ip    = (known after apply)
      + domain               = (known after apply)
      + id                   = (known after apply)
      + instance             = (known after apply)
      + network_border_group = (known after apply)
      + network_interface    = (known after apply)
      + private_dns          = (known after apply)
      + private_ip           = (known after apply)
      + public_dns           = (known after apply)
      + public_ip            = (known after apply)
      + public_ipv4_pool     = (known after apply)
      + tags                 = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all             = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc                  = true
    }

### module.subnets.aws_eip.default[1] will be created
  + resource "aws_eip" "default" {
      + allocation_id        = (known after apply)
      + association_id       = (known after apply)
      + carrier_ip           = (known after apply)
      + customer_owned_ip    = (known after apply)
      + domain               = (known after apply)
      + id                   = (known after apply)
      + instance             = (known after apply)
      + network_border_group = (known after apply)
      + network_interface    = (known after apply)
      + private_dns          = (known after apply)
      + private_ip           = (known after apply)
      + public_dns           = (known after apply)
      + public_ip            = (known after apply)
      + public_ipv4_pool     = (known after apply)
      + tags                 = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all             = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc                  = true
    }

### module.subnets.aws_nat_gateway.default[0] will be created
  + resource "aws_nat_gateway" "default" {
      + allocation_id        = (known after apply)
      + connectivity_type    = "public"
      + id                   = (known after apply)
      + network_interface_id = (known after apply)
      + private_ip           = (known after apply)
      + public_ip            = (known after apply)
      + subnet_id            = (known after apply)
      + tags                 = {
          + "Attributes" = "nat"
          + "Name"       = "eg-test-ecs-alb-service-task-nat-use2a"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + tags_all             = {
          + "Attributes" = "nat"
          + "Name"       = "eg-test-ecs-alb-service-task-nat-use2a"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
    }

### module.subnets.aws_nat_gateway.default[1] will be created
  + resource "aws_nat_gateway" "default" {
      + allocation_id        = (known after apply)
      + connectivity_type    = "public"
      + id                   = (known after apply)
      + network_interface_id = (known after apply)
      + private_ip           = (known after apply)
      + public_ip            = (known after apply)
      + subnet_id            = (known after apply)
      + tags                 = {
          + "Attributes" = "nat"
          + "Name"       = "eg-test-ecs-alb-service-task-nat-use2b"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
      + tags_all             = {
          + "Attributes" = "nat"
          + "Name"       = "eg-test-ecs-alb-service-task-nat-use2b"
          + "Namespace"  = "eg"
          + "Stage"      = "test"
        }
    }

### module.subnets.aws_network_acl.private[0] will be created
  + resource "aws_network_acl" "private" {
      + arn        = (known after apply)
      + egress     = [
          + {
              + action          = "allow"
              + cidr_block      = "0.0.0.0/0"
              + from_port       = 0
              + icmp_code       = null
              + icmp_type       = null
              + ipv6_cidr_block = ""
              + protocol        = "-1"
              + rule_no         = 100
              + to_port         = 0
            },
        ]
      + id         = (known after apply)
      + ingress    = [
          + {
              + action          = "allow"
              + cidr_block      = "0.0.0.0/0"
              + from_port       = 0
              + icmp_code       = null
              + icmp_type       = null
              + ipv6_cidr_block = ""
              + protocol        = "-1"
              + rule_no         = 100
              + to_port         = 0
            },
        ]
      + owner_id   = (known after apply)
      + subnet_ids = (known after apply)
      + tags       = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all   = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc_id     = (known after apply)
    }

### module.subnets.aws_network_acl.public[0] will be created
  + resource "aws_network_acl" "public" {
      + arn        = (known after apply)
      + egress     = [
          + {
              + action          = "allow"
              + cidr_block      = "0.0.0.0/0"
              + from_port       = 0
              + icmp_code       = null
              + icmp_type       = null
              + ipv6_cidr_block = ""
              + protocol        = "-1"
              + rule_no         = 100
              + to_port         = 0
            },
        ]
      + id         = (known after apply)
      + ingress    = [
          + {
              + action          = "allow"
              + cidr_block      = "0.0.0.0/0"
              + from_port       = 0
              + icmp_code       = null
              + icmp_type       = null
              + ipv6_cidr_block = ""
              + protocol        = "-1"
              + rule_no         = 100
              + to_port         = 0
            },
        ]
      + owner_id   = (known after apply)
      + subnet_ids = (known after apply)
      + tags       = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + tags_all   = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + vpc_id     = (known after apply)
    }

### module.subnets.aws_route.default[0] will be created
  + resource "aws_route" "default" {
      + destination_cidr_block = "0.0.0.0/0"
      + id                     = (known after apply)
      + instance_id            = (known after apply)
      + instance_owner_id      = (known after apply)
      + nat_gateway_id         = (known after apply)
      + network_interface_id   = (known after apply)
      + origin                 = (known after apply)
      + route_table_id         = (known after apply)
      + state                  = (known after apply)

      + timeouts {
          + create = "2m"
          + delete = "5m"
        }
    }

### module.subnets.aws_route.default[1] will be created
  + resource "aws_route" "default" {
      + destination_cidr_block = "0.0.0.0/0"
      + id                     = (known after apply)
      + instance_id            = (known after apply)
      + instance_owner_id      = (known after apply)
      + nat_gateway_id         = (known after apply)
      + network_interface_id   = (known after apply)
      + origin                 = (known after apply)
      + route_table_id         = (known after apply)
      + state                  = (known after apply)

      + timeouts {
          + create = "2m"
          + delete = "5m"
        }
    }

### module.subnets.aws_route.public[0] will be created
  + resource "aws_route" "public" {
      + destination_cidr_block = "0.0.0.0/0"
      + gateway_id             = (known after apply)
      + id                     = (known after apply)
      + instance_id            = (known after apply)
      + instance_owner_id      = (known after apply)
      + network_interface_id   = (known after apply)
      + origin                 = (known after apply)
      + route_table_id         = (known after apply)
      + state                  = (known after apply)

      + timeouts {
          + create = "2m"
          + delete = "5m"
        }
    }

### module.subnets.aws_route_table.private[0] will be created
  + resource "aws_route_table" "private" {
      + arn              = (known after apply)
      + id               = (known after apply)
      + owner_id         = (known after apply)
      + propagating_vgws = (known after apply)
      + route            = (known after apply)
      + tags             = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all         = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc_id           = (known after apply)
    }

### module.subnets.aws_route_table.private[1] will be created
  + resource "aws_route_table" "private" {
      + arn              = (known after apply)
      + id               = (known after apply)
      + owner_id         = (known after apply)
      + propagating_vgws = (known after apply)
      + route            = (known after apply)
      + tags             = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all         = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc_id           = (known after apply)
    }

### module.subnets.aws_route_table.public[0] will be created
  + resource "aws_route_table" "public" {
      + arn              = (known after apply)
      + id               = (known after apply)
      + owner_id         = (known after apply)
      + propagating_vgws = (known after apply)
      + route            = (known after apply)
      + tags             = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + tags_all         = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + vpc_id           = (known after apply)
    }

### module.subnets.aws_route_table_association.private[0] will be created
  + resource "aws_route_table_association" "private" {
      + id             = (known after apply)
      + route_table_id = (known after apply)
      + subnet_id      = (known after apply)
    }

### module.subnets.aws_route_table_association.private[1] will be created
  + resource "aws_route_table_association" "private" {
      + id             = (known after apply)
      + route_table_id = (known after apply)
      + subnet_id      = (known after apply)
    }

### module.subnets.aws_route_table_association.public[0] will be created
  + resource "aws_route_table_association" "public" {
      + id             = (known after apply)
      + route_table_id = (known after apply)
      + subnet_id      = (known after apply)
    }

### module.subnets.aws_route_table_association.public[1] will be created
  + resource "aws_route_table_association" "public" {
      + id             = (known after apply)
      + route_table_id = (known after apply)
      + subnet_id      = (known after apply)
    }

### module.subnets.aws_subnet.private[0] will be created
  + resource "aws_subnet" "private" {
      + arn                                            = (known after apply)
      + assign_ipv6_address_on_creation                = false
      + availability_zone                              = "us-east-2a"
      + availability_zone_id                           = (known after apply)
      + cidr_block                                     = "172.16.0.0/19"
      + enable_dns64                                   = false
      + enable_resource_name_dns_a_record_on_launch    = false
      + enable_resource_name_dns_aaaa_record_on_launch = false
      + id                                             = (known after apply)
      + ipv6_cidr_block_association_id                 = (known after apply)
      + ipv6_native                                    = false
      + map_public_ip_on_launch                        = false
      + owner_id                                       = (known after apply)
      + private_dns_hostname_type_on_launch            = (known after apply)
      + tags                                           = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all                                       = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc_id                                         = (known after apply)
    }

### module.subnets.aws_subnet.private[1] will be created
  + resource "aws_subnet" "private" {
      + arn                                            = (known after apply)
      + assign_ipv6_address_on_creation                = false
      + availability_zone                              = "us-east-2b"
      + availability_zone_id                           = (known after apply)
      + cidr_block                                     = "172.16.32.0/19"
      + enable_dns64                                   = false
      + enable_resource_name_dns_a_record_on_launch    = false
      + enable_resource_name_dns_aaaa_record_on_launch = false
      + id                                             = (known after apply)
      + ipv6_cidr_block_association_id                 = (known after apply)
      + ipv6_native                                    = false
      + map_public_ip_on_launch                        = false
      + owner_id                                       = (known after apply)
      + private_dns_hostname_type_on_launch            = (known after apply)
      + tags                                           = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + tags_all                                       = {
          + "Attributes"          = "private"
          + "Name"                = "eg-test-ecs-alb-service-task-private-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "private"
        }
      + vpc_id                                         = (known after apply)
    }

### module.subnets.aws_subnet.public[0] will be created
  + resource "aws_subnet" "public" {
      + arn                                            = (known after apply)
      + assign_ipv6_address_on_creation                = false
      + availability_zone                              = "us-east-2a"
      + availability_zone_id                           = (known after apply)
      + cidr_block                                     = "172.16.96.0/19"
      + enable_dns64                                   = false
      + enable_resource_name_dns_a_record_on_launch    = false
      + enable_resource_name_dns_aaaa_record_on_launch = false
      + id                                             = (known after apply)
      + ipv6_cidr_block_association_id                 = (known after apply)
      + ipv6_native                                    = false
      + map_public_ip_on_launch                        = true
      + owner_id                                       = (known after apply)
      + private_dns_hostname_type_on_launch            = (known after apply)
      + tags                                           = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + tags_all                                       = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public-use2a"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + vpc_id                                         = (known after apply)
    }

### module.subnets.aws_subnet.public[1] will be created
  + resource "aws_subnet" "public" {
      + arn                                            = (known after apply)
      + assign_ipv6_address_on_creation                = false
      + availability_zone                              = "us-east-2b"
      + availability_zone_id                           = (known after apply)
      + cidr_block                                     = "172.16.128.0/19"
      + enable_dns64                                   = false
      + enable_resource_name_dns_a_record_on_launch    = false
      + enable_resource_name_dns_aaaa_record_on_launch = false
      + id                                             = (known after apply)
      + ipv6_cidr_block_association_id                 = (known after apply)
      + ipv6_native                                    = false
      + map_public_ip_on_launch                        = true
      + owner_id                                       = (known after apply)
      + private_dns_hostname_type_on_launch            = (known after apply)
      + tags                                           = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + tags_all                                       = {
          + "Attributes"          = "public"
          + "Name"                = "eg-test-ecs-alb-service-task-public-use2b"
          + "Namespace"           = "eg"
          + "Stage"               = "test"
          + "cpco.io/subnet/type" = "public"
        }
      + vpc_id                                         = (known after apply)
    }

### module.vpc.aws_default_security_group.default[0] will be created
  + resource "aws_default_security_group" "default" {
      + arn                    = (known after apply)
      + description            = (known after apply)
      + egress                 = (known after apply)
      + id                     = (known after apply)
      + ingress                = (known after apply)
      + name                   = (known after apply)
      + name_prefix            = (known after apply)
      + owner_id               = (known after apply)
      + revoke_rules_on_delete = false
      + tags                   = {
          + "Name"      = "Default Security Group"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + tags_all               = {
          + "Name"      = "Default Security Group"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + vpc_id                 = (known after apply)
    }

### module.vpc.aws_internet_gateway.default[0] will be created
  + resource "aws_internet_gateway" "default" {
      + arn      = (known after apply)
      + id       = (known after apply)
      + owner_id = (known after apply)
      + tags     = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + tags_all = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + vpc_id   = (known after apply)
    }

### module.vpc.aws_vpc.default[0] will be created
  + resource "aws_vpc" "default" {
      + arn                                  = (known after apply)
      + assign_generated_ipv6_cidr_block     = true
      + cidr_block                           = "172.16.0.0/16"
      + default_network_acl_id               = (known after apply)
      + default_route_table_id               = (known after apply)
      + default_security_group_id            = (known after apply)
      + dhcp_options_id                      = (known after apply)
      + enable_classiclink                   = false
      + enable_classiclink_dns_support       = false
      + enable_dns_hostnames                 = true
      + enable_dns_support                   = true
      + id                                   = (known after apply)
      + instance_tenancy                     = "default"
      + ipv6_association_id                  = (known after apply)
      + ipv6_cidr_block                      = (known after apply)
      + ipv6_cidr_block_network_border_group = (known after apply)
      + main_route_table_id                  = (known after apply)
      + owner_id                             = (known after apply)
      + tags                                 = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
      + tags_all                             = {
          + "Name"      = "eg-test-ecs-alb-service-task"
          + "Namespace" = "eg"
          + "Stage"     = "test"
        }
    }

Plan: 30 to add, 0 to change, 0 to destroy.

Changes to Outputs:
  + container_definition_json     = jsonencode(
        [
          + {
              + cpu                    = 256
              + environment            = [
                  + {
                      + name  = "false_boolean_var"
                      + value = "false"
                    },
                  + {
                      + name  = "integer_var"
                      + value = "42"
                    },
                  + {
                      + name  = "string_var"
                      + value = "I am a string"
                    },
                  + {
                      + name  = "true_boolean_var"
                      + value = "true"
                    },
                ]
              + essential              = true
              + image                  = "cloudposse/geodesic"
              + memory                 = 256
              + memoryReservation      = 128
              + mountPoints            = []
              + name                   = "geodesic"
              + portMappings           = [
                  + {
                      + containerPort = 80
                      + hostPort      = 80
                      + protocol      = "tcp"
                    },
                  + {
                      + containerPort = 443
                      + hostPort      = 443
                      + protocol      = "udp"
                    },
                ]
              + readonlyRootFilesystem = false
              + volumesFrom            = []
            },
        ]
    )
  + container_definition_json_map = jsonencode(
        {
          + cpu                    = 256
          + environment            = [
              + {
                  + name  = "false_boolean_var"
                  + value = "false"
                },
              + {
                  + name  = "integer_var"
                  + value = "42"
                },
              + {
                  + name  = "string_var"
                  + value = "I am a string"
                },
              + {
                  + name  = "true_boolean_var"
                  + value = "true"
                },
            ]
          + essential              = true
          + image                  = "cloudposse/geodesic"
          + memory                 = 256
          + memoryReservation      = 128
          + mountPoints            = []
          + name                   = "geodesic"
          + portMappings           = [
              + {
                  + containerPort = 80
                  + hostPort      = 80
                  + protocol      = "tcp"
                },
              + {
                  + containerPort = 443
                  + hostPort      = 443
                  + protocol      = "udp"
                },
            ]
          + readonlyRootFilesystem = false
          + volumesFrom            = []
        }
    )
  + ecs_cluster_arn               = (known after apply)
  + ecs_cluster_id                = (known after apply)
  + ecs_exec_role_policy_id       = (known after apply)
  + ecs_exec_role_policy_name     = "eg-test-ecs-alb-service-task-exec"
  + private_subnet_cidrs          = [
      + "172.16.0.0/19",
      + "172.16.32.0/19",
    ]
  + public_subnet_cidrs           = [
      + "172.16.96.0/19",
      + "172.16.128.0/19",
    ]
  + service_security_group_id     = (known after apply)
  + task_definition_family        = "eg-test-ecs-alb-service-task"
  + task_definition_revision      = (known after apply)
  + task_exec_role_arn            = (known after apply)
  + task_exec_role_name           = "eg-test-ecs-alb-service-task-exec"
  + task_role_arn                 = (known after apply)
  + task_role_id                  = (known after apply)
  + task_role_name                = "eg-test-ecs-alb-service-task-task"
  + vpc_cidr                      = "172.16.0.0/16"
╷
│ Warning: Argument is deprecated
│
│   with module.subnets.aws_route.nat_instance,
│   on .terraform/modules/subnets/nat-instance.tf line 130, in resource "aws_route" "nat_instance":
│  130:   instance_id            = element(aws_instance.nat_instance.*.id, count.index)
│
│ Use network_interface_id instead

`v0.66.0`

Compare Source

Add ecs_service_enabled @nitrocode (#169)

what

Add ecs_service_enabled

why

Create all the underlying resources but skip the ecs service. This is useful when creating a run-once task such as for db migrations.

references

N/A

`v0.65.0`

Compare Source

BUG | Support Dynamic deployment_circuit_breaker for CODE_DEPLOY @lgants (#165)

what

The deployment_circuit_breaker option is now a dynamic block with a conditional for the deployment_controller_type value

why

This PR fixes an issue when using CODE_DEPLOY deployment_circuit_breaker option.
Previously, the deployment_circuit_breaker was always included as part of the module. However, the AWS DeploymentCircuitBreaker documentation states":

The deployment circuit breaker can only be used for services using the rolling update (ECS) deployment type that aren't behind a Classic Load Balancer.

Consequently, when using CODE_DEPLOY for deployment_circuit_breaker with this module, the state is consistently out of sync with the remote, which attempts to sync with the remote on every update.

references

AWS DeploymentCircuitBreaker documentation: https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeploymentCircuitBreaker.html

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR has been generated by Mend Renovate. View repository job log here.

…v0.74.0

mergify · 2024-04-02T17:19:57Z

/terratest

renovate · 2024-04-02T18:58:07Z

Edited/Blocked Notification

Renovate will not automatically rebase this PR, because it does not recognize the last commit author and assumes somebody else may have edited the PR.

You can manually request rebase by checking the rebase/retry box above.

⚠️ Warning: custom changes will be lost.

chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to …

0026b79

…v0.74.0

renovate bot requested review from a team as code owners April 2, 2024 17:19

renovate bot added the auto-update This PR was automatically generated label Apr 2, 2024

renovate bot requested review from hans-d and johncblandii and removed request for a team April 2, 2024 17:19

Auto-update README.md

bc54c91

mergify bot added the readme Improvements or additions to the README label Apr 2, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to v0.74.0 (release/v1) #262

chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to v0.74.0 (release/v1) #262

Uh oh!

renovate bot commented Apr 2, 2024

Uh oh!

mergify bot commented Apr 2, 2024

Uh oh!

renovate bot commented Apr 2, 2024 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Uh oh!

chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to v0.74.0 (release/v1) #262

Are you sure you want to change the base?

chore(deps): update terraform cloudposse/ecs-alb-service-task/aws to v0.74.0 (release/v1) #262

Uh oh!

Conversation

renovate bot commented Apr 2, 2024

Release Notes

🚀 Enhancements

what

why

references

what

why

references

🚀 Enhancements

what

why

references

what

why

what

why

references

what

why

History

This Solution

🚀 Enhancements

what

why

references

what

why

references

🚀 Enhancements

what

why

Note:

🐛 Bug Fixes

what

why

Note:

🚀 Enhancements

what

why

references

what

why

references

🤖 Automatic Updates

what

why

🚀 Enhancements

what

why

references

command

what

why

references

what

why

references

Configuration

Uh oh!

mergify bot commented Apr 2, 2024

Uh oh!

renovate bot commented Apr 2, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Edited/Blocked Notification

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

renovate bot commented Apr 2, 2024 •

edited

Loading