20.3.0 (Bitwig 5.0+)

• Requires Bitwig 5.0+
• All devices
  • New: Sends can now be changed for send channels as well.
• APC40 mkII
  • New: Press USER to select the user mode to control project and track parameters. Press again to toggle between the project and track parameters.
• APCmini
  • Fixed: Send channels could not selected.
• Fire
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters.
• Generic Flexi
  • New: User parameter commands are replaced with commands for project and track parameters (Project Remotes / Track Remotes).
  • New: The FX Track section has now also Send commands.
• Launchkey Mini
  • New: The User mode was replaced with the Project Parameters mode to change project parameters.
• Launchkey Mk3
  • Fixed: Toggling groups open/closed always got triggered twice.
• Launchpad
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Up/down button switches between them. Left/right switches pages.
• Maschine
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Cursor left/right switches between them. Encoder up/down buttons switches pages.
• Maschine JAM
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. SELECT+CONTROL switches between them.
• MCU
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Fader bank left/right switches between them. Channel left/right switches pages.
• OSC
  • New: There is now a setting to choose between flat and hierarchical track navigation.
  • New: Increased the number of configurable actions to 20.
  • New: /automationWriteMode also dis-/enables clip automation record.
  • New: /user commands are replaced with according /project and /track commands. OpenStageControl template got updated to reflect this (but only with /project commands).
  • Fixed: Send attributes could not be changed (except volume).
  • Fixed: Device page name was missing the 'name' part.
• Push
  • New: The user mode gives now access to the project and track parameters. First 2 buttons of the 2nd row toggle between Project and (selected) Track parameters.
  • Fixed: Only the first 8 scenes could be launched in Scenes view.
• SLMkIII
  • New: The user mode has been replaced with a Project FX and Track FX mode. Keep the UP button pressed and select the modes with the 7th/8th row button. These modes give access to the project and track parameters.
• Turn
  • Fixed: Only the first 8 scenes could be launched in Scenes view.

20.2.1 (Bitwig 5.0+)

• Fire
  • New: Names of drum pads are now displayed when switching selection in drum mode.
• Generic Flexi
  • Fixed: MIDI feedback from on/off values did sent 1/0 instead of 127/0.
• Launchkey Mk3
  • Fixed: Wrong mode was set after closing the browser.
• MCU
  • Fixed: Fader flip did not work in Instrument mode.

20.2.0 (Bitwig 5.0+)

• Added support for the ESI Xjam controller
• Komplete Kontrol MkII
  • New: Make sure that the same slot is selected when switching tracks.
• MCU
  • Fixed: Added missing EQ and INST buttons to simulator.

20.1.0 (Bitwig 5.0+)

• Launch Control XL
  • Fixed: Moving drum pad range was broken.
• Launchpad, Push
  • Fixed: Clip Length mode was not always recalled.
• MCU
  • New: Layer mode uses now the first instrument instead of the selected device.
  • Fixed: Device froze when there were no sends and send 2 was selected.
• OSC
  • Fixed: Moving drum pad range was broken.
• SLMkIII
  • Fixed: Set knob layout only when necessary.

20.0.0 (Bitwig 5.0+)

• Beatstep, Electra One, Gamepad, Generic Flexi
  • New: The new Bitwig 5 clip and scene release functions can be used.
• APC40
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Shift+Stop All Clips button triggers the alternative stop function.
  • New: MkI: Press Shift+Device On/Off button to open/close the browser (was Shift+Stop All Clips).
  • Fixed: MkI: Selecting channel A or B for crossfader did not work.
• APCmini
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Existing scenes have now the color green. The selected scene blinks green.
• Fire
  • New: Toggling the Birds Eye view in session mode (SHIFT+PERFORM) directly closes the Shift mode and displays an info in the display which mode is selected.
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative function is triggered in combination with the SHIFT button. To only select a clip or scene press ALT and the pad of the clip.
• Generic Flexi:
  • New: Added new functions Clip: Play Alternative and Scene N: Launch Scene Alternative.
  • New: Added new functions Clip: Stop Alternative, Clip: Stop All and Clip: Stop All Alternative.
• Launch Control XL
  • New: The new Bitwig 5 scene release function can be used.
• Launchkey / Launchkey Mini / SLMk3
  • New: The new Bitwig 5 clip and scene release functions can be used.
  • New: Mini: The executed functions when Stop/Solo/Mute is pressed are displayed.
• Launchpad
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button. The previous long press function to select a clip had to be removed to make this work.
  • New: The Shift mode has a new button to execute the alternative 'stop all clips' function (left to the normal 'stop all clips' pad).
  • New: If the 'stop clip' row is active in session mode, the pads can be used in combination with the Shift button to trigger the alternative Stop function.
  • New: Pro Mk3: Combine Shift with the track buttons in Stop Clip mode to trigger the alternative Stop function.
• Maschine
  • New: Pattern + Scene modes: The new Bitwig 5 clip and scene release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. To select a clip/scene use the SELECT button.
  • New: Pattern mode: Shift+PATTERN button triggers the alternative clip stop function.
  • New: Scene mode: Shift+SCENE button triggers the alternative clip stop function.
• Maschine JAM
  • New: Pattern + Scene modes: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. To select a clip/scene use the SELECT button.
  • New: Select + MUTE + clip pad triggers the alternative clip stop function.
• MCU
  • New: SAVE button LED is off when project is not modified.
  • New: OPTION + press a knob which controls a send level toggles the send on/off.
• MPC/Force
  • New: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Shift+Stop All Clips button triggers the alternative stop function.
  • New: (Force only): Use SELECT in combination with a pad to only select a clip or scene.
  • New: (Force only): Use SHIFT+Scene button to trigger the alternative Scene function.
• OSC
  • New: 'launch' has now a parameter to trigger press and release on both clips and scenes.
  • New: Added 'launchAlt' to trigger the alternative launch function on both clips and scenes.
  • New: Added sending: /track/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added sending: /device/layer/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added receive: /track/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
  • New: Added receive: /device/layer/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
  • New: Added receive: /track/stopAlt - Alternative function to stop playback on the track, e.g. not quantized.
  • New: Added receive: /clip/stopallAlt - Alternative function to stop the playback of all clips, e.g. not quantized.
• Push
  • New: The new Bitwig 5 clip and scene release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. The previous long press function to select a clip had to be removed to make this work.
  • New: Use Select+Clip/Scene to select it.
  • New: The birds-eye view in Session mode is now activated by holding Shift+Select.
  • New: Stop Clip button+first row buttons triggers the alternative stop function.
  • New: Shift+Stop Clip button triggers the alternative stop all function.
  • New: Sends can be dis-/enabled. Keep SHIFT pressed, then additionally SELECT and finally touch a knob which modifies a send.
  • New: Added some CLAP devices to the Add Track settings.
  • Fixed: Birds-eye view in Session mode had a blinking issue.
• SL Mk II
  • New: The new Bitwig 5 scene release function can be used.
  • Fixed: Transport commands did not work in Play mode.
  • Fixed: Display of scene names did not work for non-existing scenes.
• Turn
  • New: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Hold Select to select a clip without starting playback.
  • New: Shift+stop buttons: Stop the playing clip on the channel using the alternative setting.

19.2.2 (Bitwig 4.3+)

• All devices
  • Fixed: Set note repeat octaves to 1 to match the Bitwig default.
• Generic Flexi
  • New: Enabled clip rectangle.
  • New: Documented Shift button function in the manual.
  • Fixed: Renamed 'Parameters' to 'Device' in the selected mode list to match the naming in the function lists.
• Maschine Mk2 / Studio
  • Fixed: The poly aftertouch settings in the template were off by 2 octaves and therefore did not work. Please install the new template to fix this.
• Push 1
  • Fixed: Low pad threshold warning was not displayed in the info mode (and caused a crash).
  • Fixed: Firmware version was not displayed in info mode.

19.2.1 (Bitwig 4.3+)

• All devices
  • New: Sped up arranger position changes (play position, loop, etc.). Normal, changes now 1 bar and slow, 1 quarter.
• Electra One
  • New: The last active mode is restored when returning from a different preset.
  • Fixed: Values were still set in other presets when changes appear in the DAW.
  • Fixed: Mode did not update the values when jumping back from a different preset.

19.2.0 (Bitwig 4.3+)

• Electra One
  • Requires Firmware 3.1!
  • New: Labels for parameter values are now set.
  • New: Knob touch states are now available which allows smoother value updates and automation touch mode to work.
  • New: Play position and tempo can now be changed with knobs.
  • New: Replaced Cue Volume with Play Position on all pages. Cue Volume is now available on the Transport page.
  • New: Added a Session mode for launching scenes/clips and more.
  • New: Quick navigation between pages by touching 3 knobs (see the manual).
  • New: Jump to a specific Electra One synthesizer preset for editing the plugin in focus. The preset must have the same name as the preset.
• LaunchControl XL
  • Fixed: Crash when setting the drum or note sequencer resolution.
• Launchpad
  • Fixed: Fader animations did not work in user mode (hopefully this fix works on all systems).
  • Fixed: Do not leave user mode on track change.
  • Fixed: Browser did not open on tracks without a device present.
• MCU
  • New: Master Track mode is only activated on master track selection if the current mode is the Track mode.
  • New: Use the first instrument of the track for layer navigation instead of the cursor device.
• Push
  • New: If ribbon controller is set to the mode 'Fader' or 'Last Touched' it can now be combined with the delete button to reset the respective parameter to its' default value.
  • New: Added / updated several devices for the 'Add Track' - favorite devices settings.

19.1.0 (Bitwig 4.3+)

• Fire
  • New: Device and parameter page names are shown now in two lines instead of one.
• Launchpad
  • New: Added clip length (loop area) mode. Press User/Custom on the Pro models. On the other models use the mode selection.
  • New: User parameter mode is now available on all models.
  • New: Pressing Device button twice switches to User parameter mode.
  • New: Rearranged the functions of the Scene buttons in Device mode. Last button opens now the browser.
  • New: Improved harmonization of mode colors.
  • Fixed: Pro Mk3: Tracks could not not be selected.
• Maschine
  • Fixed: Erase+Master Knob did not work to reset parameters.
• Push
  • New: The 'Clip' mode was renamed to 'Clip Length'. The length (actually the loop) is now colored in the clips' color.

19.0.0 (Bitwig 4.3+)

• Added support for Electra One controller.
• Generic Flexi
  • Fixed: Browser - Scroll Filter Column did crash.
  • Fixed: Browser - Scrolling in browser mode did always scroll down.
  • Fixed: Last selected mode was not set after restart.
• Launchpad
  • New: Set the default for Shift+Record to New clip + enable automation.
  • New: Added a brightness setting for the pads. Only available on Mini Mk3 and X.
  • Fixed: New record command configuration was broken on non-pro models.
• MIDI Monitor
  • New: Added number of bytes to system exclusive message logs.